Stainless steel flange die forging equipment and application characteristics
Date:
2023-03-27
The mechanical properties of the forgings are higher than those produced on the hammer; High productivity; Less metal loss; The forging die on the hammer is composed of two parts of the upper and lower die, the horizontal machine is composed of three parts of the punch and the punching pad synthesized by the two halves, so it is possible to forge the forging that can not be made on the hammer die forging; Accurate size, smooth surface.
The mechanical properties of the forgings are higher than those produced on the hammer; High productivity; Less metal loss; The forging die on the hammer is composed of two parts of the upper and lower die, the horizontal machine is composed of three parts of the punch and the punching pad synthesized by the two halves, so it is possible to forge the forging that can not be made on the hammer die forging; Accurate size, smooth surface.
The key points of forging design of horizontal press die forging: the forging should not hinder the concave part of forging die separate after upsetting; Have a slope; Have rounded corners; Avoid the thin neck part of the forging on the longitudinal section, which impedes the flow of metal; To avoid the middle of the concave and tail cone; Flange of the shaft, when the length is equal to the diameter of 10-12 times, flange can not be greater than the volume of the shaft; The wall thickness of perforated forgings should not be less than 0.15 times the diameter.
Key Words:
Related News
Welcome to our company
SHIJIAZHUANG DINGSHENG PIPE CO., LTD
Telephone: 86-311-89688300/89685181 Email: commercial@dingshengpipe.com
P.c: 050031
Address: 1-2-2504，Cotton Mansion,Jianshe Street,Chang’an District:,Shijiazhuang,Hebei Province,China
这里是标题一h1占位文字
Copyright © 2022 SHIJIAZHUANG DINGSHENG PIPE CO., LTD